Domainim - A Fast And Comprehensive Tool For Organizational Network Scanning


Domainim is a fast domain reconnaissance tool for organizational network scanning. The tool aims to provide a brief overview of an organization's structure using techniques like OSINT, bruteforcing, DNS resolving etc.


Features

Current features (v1.0.1)- - Subdomain enumeration (2 engines + bruteforcing) - User-friendly output - Resolving A records (IPv4)

A fast and comprehensive tool for organizational network scanning (6)

A fast and comprehensive tool for organizational network scanning (7)

  • Virtual hostname enumeration
  • Reverse DNS lookup

A fast and comprehensive tool for organizational network scanning (8)

  • Detects wildcard subdomains (for bruteforcing)

A fast and comprehensive tool for organizational network scanning (9)

  • Basic TCP port scanning
  • Subdomains are accepted as input

A fast and comprehensive tool for organizational network scanning (10)

  • Export results to JSON file

A fast and comprehensive tool for organizational network scanning (11)

A few features are work in progress. See Planned features for more details.

The project is inspired by Sublist3r. The port scanner module is heavily based on NimScan.

Installation

You can build this repo from source- - Clone the repository

git clone [email protected]:pptx704/domainim
  • Build the binary
nimble build
  • Run the binary
./domainim <domain> [--ports=<ports>]

Or, you can just download the binary from the release page. Keep in mind that the binary is tested on Debian based systems only.

Usage

./domainim <domain> [--ports=<ports> | -p:<ports>] [--wordlist=<filename> | l:<filename> [--rps=<int> | -r:<int>]] [--dns=<dns> | -d:<dns>] [--out=<filename> | -o:<filename>]
  • <domain> is the domain to be enumerated. It can be a subdomain as well.
  • -- ports | -p is a string speicification of the ports to be scanned. It can be one of the following-
  • all - Scan all ports (1-65535)
  • none - Skip port scanning (default)
  • t<n> - Scan top n ports (same as nmap). i.e. t100 scans top 100 ports. Max value is 5000. If n is greater than 5000, it will be set to 5000.
  • single value - Scan a single port. i.e. 80 scans port 80
  • range value - Scan a range of ports. i.e. 80-100 scans ports 80 to 100
  • comma separated values - Scan multiple ports. i.e. 80,443,8080 scans ports 80, 443 and 8080
  • combination - Scan a combination of the above. i.e. 80,443,8080-8090,t500 scans ports 80, 443, 8080 to 8090 and top 500 ports
  • --dns | -d is the address of the dns server. This should be a valid IPv4 address and can optionally contain the port number-
  • a.b.c.d - Use DNS server at a.b.c.d on port 53
  • a.b.c.d#n - Use DNS server at a.b.c.d on port e
  • --wordlist | -l - Path to the wordlist file. This is used for bruteforcing subdomains. If the file is invalid, bruteforcing will be skipped. You can get a wordlist from SecLists. A wordlist is also provided in the release page.
  • --rps | -r - Number of requests to be made per second during bruteforce. The default value is 1024 req/s. It is to be noted that, DNS queries are made in batches and next batch is made only after the previous one is completed. Since quries can be rate limited, increasing the value does not always guarantee faster results.
  • --out | -o - Path to the output file. The output will be saved in JSON format. The filename must end with .json.

Examples - ./domainim nmap.org --ports=all - ./domainim google.com --ports=none --dns=8.8.8.8#53 - ./domainim pptx704.com --ports=t100 --wordlist=wordlist.txt --rps=1500 - ./domainim pptx704.com --ports=t100 --wordlist=wordlist.txt --outfile=results.json - ./domainim mysite.com --ports=t50,5432,7000-9000 --dns=1.1.1.1

The help menu can be accessed using ./domainim --help or ./domainim -h.

Usage:    domainim <domain> [--ports=<ports> | -p:<ports>] [--wordlist=<filename> | l:<filename> [--rps=<int> | -r:<int>]] [--dns=<dns> | -d:<dns>] [--out=<filename> | -o:<filename>]    domainim (-h | --help)Options:    -h, --help              Show this screen.    -p, --ports             Ports to scan. [default: `none`]                            Can be `all`, `none`, `t<n>`, single value, range value, combination    -l, --wordlist          Wordlist for subdomain bruteforcing. Bruteforcing is skipped for invalid file.    -d, --dns               IP and Port for DNS Resolver. Should be a valid IPv4 with an optional port [default: system default]    -r, --rps               DNS queries to be made per second [default: 1024 req/s]    -o, --out               JSON file where the output will be saved. Filename must end with `.json`Examples:    domainim domainim.com -p:t500 -l:wordlist.txt --dns:1.1.1.1#53 --out=results.json    domainim sub.domainim.com --ports=all --dns:8.8.8.8 -t:1500 -o:results.json

The JSON schema for the results is as follows-

[  {    "subdomain": string,    "data": [      "ipv4": string,      "vhosts": [string],      "reverse_dns": string,      "ports": [int]    ]  }]

Example json for nmap.org can be found here.

Contributing

Contributions are welcome. Feel free to open a pull request or an issue.

Planned Features

  • [x] TCP port scanning
  • [ ] UDP port scanning support
  • [ ] Resolve AAAA records (IPv6)
  • [x] Custom DNS server
  • [x] Add bruteforcing subdomains using a wordlist
  • [ ] Force bruteforcing (even if wildcard subdomain is found)
  • [ ] Add more engines for subdomain enumeration
  • [x] File output (JSON)
  • [ ] Multiple domain enumeration
  • [ ] Dir and File busting

Others

  • [x] Update verbose output when encountering errors (v0.2.0)
  • [x] Show progress bar for longer operations
  • [ ] Add individual port scan progress bar
  • [ ] Add tests
  • [ ] Add comments and docstrings

Additional Notes

This project is still in its early stages. There are several limitations I am aware of.

The two engines I am using (I'm calling them engine because Sublist3r does so) currently have some sort of response limit. dnsdumpster.com">dnsdumpster can fetch upto 100 subdomains. crt.sh also randomizes the results in case of too many results. Another issue with crt.sh is the fact that it returns some SQL error sometimes. So for some domain, results can be different for different runs. I am planning to add more engines in the future (at least a brute force engine).

The port scanner has only ping response time + 750ms timeout. This might lead to false negatives. Since, domainim is not meant for port scanning but to provide a quick overview, such cases are acceptable. However, I am planning to add a flag to increase the timeout. For the same reason, filtered ports are not shown. For more comprehensive port scanning, I recommend using Nmap. Domainim also doesn't bypass rate limiting (if there is any).

It might seem that the way vhostnames are printed, it just brings repeition on the table.

A fast and comprehensive tool for organizational network scanning (12)

Printing as the following might've been better-

ack.nmap.org, issues.nmap.org, nmap.org, research.nmap.org, scannme.nmap.org, svn.nmap.org, www.nmap.org  ↳ 45.33.49.119    ↳ Reverse DNS: ack.nmap.org. 

But previously while testing, I found cases where not all IPs are shared by same set of vhostnames. That is why I decided to keep it this way.

A fast and comprehensive tool for organizational network scanning (13)

DNS server might have some sort of rate limiting. That's why I added random delays (between 0-300ms) for IPv4 resolving per query. This is to not make the DNS server get all the queries at once but rather in a more natural way. For bruteforcing method, the value is between 0-1000ms by default but that can be changed using --rps | -t flag.

One particular limitation that is bugging me is that the DNS resolver would not return all the IPs for a domain. So it is necessary to make multiple queries to get all (or most) of the IPs. But then again, it is not possible to know how many IPs are there for a domain. I still have to come up with a solution for this. Also, nim-ndns doesn't support CNAME records. So, if a domain has a CNAME record, it will not be resolved. I am waiting for a response from the author for this.

For now, bruteforcing is skipped if a possible wildcard subdomain is found. This is because, if a domain has a wildcard subdomain, bruteforcing will resolve IPv4 for all possible subdomains. However, this will skip valid subdomains also (i.e. scanme.nmap.org will be skipped even though it's not a wildcard value). I will add a --force-brute | -fb flag later to force bruteforcing.

Similar thing is true for VHost enumeration for subdomain inputs. Since, urls that ends with given subdomains are returned, subdomains of similar domains are not considered. For example, scannme.nmap.org will not be printed for ack.nmap.org but something.ack.nmap.org might be. I can search for all subdomains of nmap.org but that defeats the purpose of having a subdomains as an input.

License

MIT License. See LICENSE for full text.




Source: www.kitploit.com
Domainim - A Fast And Comprehensive Tool For Organizational Network Scanning Domainim - A Fast And Comprehensive Tool For Organizational Network Scanning Reviewed by Zion3R on 8:23 AM Rating: 5